• on 29 Okt 2018
• By admin
• MANAGEMENT

TRAINING NOISE CONTROL MANAGEMENT

TRAINING NOISE CONTROL MANAGEMENT

Training Noise Control

Training Manajemen Kontrol Kebisingan

TRAINING INTRODUCTION :

One possible cause of hearing damages on men is the level of noise exposures that beyond the limit of sound pressure level or percent dose allowed for a normal working hours. Industrial workers who receive noise exposure in their everyday working environment, are vulnerable to experience hearing damage either in the form of temporary (TTS) or permanent threshold shift ((PTS). Therefore, the industry should establish a professional program of noise control management in order to protect the health and safety of the workers.
In association with Indonesian regulation for safety and healthy working condition (PP No. 3 1975), limit of Leq 85 dBA noise exposure level for 8 hours working day is required for work places. Instead, a Leq limit of 90 dBA steady noise levels for 8 hours working day is determined in OSHA regulation (1974) for occupational noise. Higher levels of noise will reduce the allowable exposure time or working period of workers; therefore, a feasible administrative or engineering noise controls should be applied. When employees are subjected to noise exposures exceeding the limit stated in OSHA regulation, personal ear protectors, such as, earplug or earmuff, shall be provided.

TRAINING OBJECTIVES:
1. Learn about noise in industry and the effects of noise to workers
Learn about noise measurement and analysis techniques including instrumentation
2. Learn how to design, monitor and implementing a management system for preserving health and safety of workers from noise exposure in industry
3. Learn how to design, monitor and implementing noise control engineering in industry

WHO SHOULD ATTEND THIS TRAINING?
Safety, Health and Environmental Manager / Engineer, Power Plant and Process Facility, Process and Design, Maintenance Manager / Superintendent / Engineer, Chief Medical Officer

TRAINING MATERIAL OUTLINE :
1. INTRODUCTION
2. FUNDAMENTALS OF ACOUSTICS
a. Sound Levels and Decibel Scales
b. Sound Propagation Outdoors and Indoors
c. Air and Structure borne Sound Propagations
3. NOISE SOURCES IN INDUSTRY
a. Fan Noise
b. Compressor and Pump Noise
c. Jet Noise
d. Pipe Flow Noise
e. Other Noise Sources
4. NOISE MEASUREMENT AND FREQUENCY ANALYSIS
a. Measurement Methods
b. Microphones
c. SLM and Integrating Devices
d. Time Varying Noise and Spectrum Analysis
e. Audiometer
5. HEARING CHARACTERISTICS
a. Hearing Mechanism and Threshold of Hearing
b. Loudness Levels and Computation
c. Hearing Loss and Audiometric Test
6. EFFECTS OF NOISE ON HUMAN
a. Annoyance Levels
b. Noise Induced Hearing Loss
c. Noise Dose Calculation
7. NOISE CONTROL TECHNIQUES
a. Planning a Noise Control Program
b. Noise Control by Planning and Maintenance
c. Enclosure and Barriers
d. Silencers, Mufflers and Attenuators
e. Noise Control by Room Treatment
8. NOISE CONTROL MANAGEMENT
a. Priority Planning and Approach
b. Noise survey and Visual Inspection
c. Noise Abatement Procedures and Guidelines
d. Hearing Conservation Program
e. Noise Control Standards and Regulations
9. TUTORIALS AND PRACTICAL WORKS
a. Insulation
b. Noise measurement and frequency analysis
c. Noise Dose

TRAINING INSTRUCTOR

Dr. Ir. Ida Bagus Ardhana Putra is senior lecturer at Physics Engineering Department Bandung Institute of Tecnology (ITB). Born in Klungkung Bali, 26 January 1951. He was graduate from Physics Engineering ITB 1976. Ph.D from University New South Wales Australia in Acoustics and Noise Control 1990. Head Laboratory Acoustic Physics Engineering Department ITB ( 1996 – now) and President Indonesian Acoustics Vibration Association ( 1997 – now). Senior researcher of Bandung Institute of Technology, Consultant Acoustic and Noise Control PT. IPTN, PT. KHS Bandung and of PT. ELMES Jakarta. Instructor in so many courses and training of LPM ITB. Experienced in giving training of Environmental Noise 2002- now, Noise Control Management 2001 – now

Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training. Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.

• Jadwal Pelatihan 2025

  • BATCH 1 : 13-14 Januari 2025
  • BATCH 2 : 10-11 Februari 2025
  • BATCH 3 : 10-11 Maret 2025
  • BATCH 4 : 14-15 April 2025
  • BATCH 5 : 15-16 Mei 2025
  • BATCH 6 : 12-13 Juni 2025
  • BATCH 7 : 10-11 Juli 2025
  • BATCH 8 : 18-19 Agustus 2025
  • BATCH 9 : 17-18 September 2025
  • BATCH 10 : 16-17 Oktober 2025
  • BATCH 11 : 13-14 November 2025
  • BATCH 12 : 15-16 Desember 2025

Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta training pelayanan konsumen prima terbaru

Lokasi training kiat kiat dan seni membuat customer anda happy terbaru :

• Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
• Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
• Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
• Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
• Lombok, Hotel Jayakarta (7.500.000 IDR / participant)

Investasi Pelatihan :

Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.

Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.

Fasilitas training pelayanan konsumen prima murah :

• FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
• FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training kiat kiat dan seni membuat customer anda happy terupdate
• Module / Handout training customer service excellence terupdate
• FREE Flashdisk
• Sertifikat training pengenalan customer service excellence murah
• FREE Bag or bagpackers (Tas Training)
• Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
• 2xCoffe Break & 1 Lunch, Dinner
• FREE Souvenir Exclusive