TRAINING MOTOR DRIVER & AUTOMATION SYSTEM & MOTOR INVERTER SYSTEM
TRAINING MOTOR DRIVER & AUTOMATION SYSTEM & MOTOR INVERTER SYSTEM
Training Pengenalan Motor Driver
Training Konsep Sistem Automatisasi
MOTOR DRIVER & AUTOMATION SYSTEM & MOTOR INVERTER SYSTEM
pengenalan motor driver
konsep sistem automatisasi
sistem automatisasi motor
DESCRIPTION training motor driver & automation system & motor inverter system terbaru
Electric Motor technical course will discuss application and
installation issues related to motors, variable frequency drives and
related automation products in three important sessions. The course
will conclude with an operating demonstration that will illustrate the
three types of equipment tied together into one system via
communication cabling, as well as over air via radio transmission.
The Motors, Drives and Automation Systems course will provide the
delegates with a solid base of Motor, Drive and Automation theory. The
course will also make delegates aware of issues concerning the proper
application, installation and maintenance of these types of equipment.
The material handouts will cover a wide range starting from the basics
and moving on to more complex issues.
* Application issues
* Speed range
* Torque Capability
* Min Speed
* Max Speed
* Reversing
* Stopping/Braking
OBJECTIVE training pengenalan motor driver terbaru
* Learn the Fundamentals of motors, drives and automation systems
* Update Yourself on the Latest Advancements in VFDs
* Learn the Latest Improvements in Motor Efficiency
* Practical Approaches and Problem-Solving Solutions
* Learn How to Solve Common Motor and VFD Problems
* Learn Practical Troubleshooting Techniques
* Learn the Automation Considerations Between Motors, Drives and
PLCs
* Reduce Reliance on Outside Service Companies
* Make Sure Your Equipment is Up and Running
OUTLINE CONTENT training konsep sistem automatisasi murah
Session One: Electric Motors
* Electromagnetism
* Developing a Rotating Magnetic Field
* NEMA Rotor Characteristics
* Motor Specifications
* NEMA and IEEE standards
* Enclosures
* MG! Part 30 and Part 31 differences
* Impregnation Systems
* Stator Failures and preventative measures
* AC Rotor Construction
* Rotor Failures
* Enclosures, Frames & Cooling
* Bearings
* Bearing Failures
* Insulation Classes
* General Motor Testing Methods
* Motor Overhauls
* Motor Rewinds
* On-line Condition Monitoring
* Information Management for Decision-making
* Qualifying Repair Facilities
* Memprogram Setting Parameter Inverter
Session Two: AC Drives
* VFD Overview
* Voltage And Frequency
* Basic AC Drive
* Constant Torque Applications
* Variable Torque Applications
* Constant Horsepower Applications
* Multi-motor Applications
* Input Filtering requirements
– Line transients
– Power Factor
– Harmonic mitigation
* VFD Demonstration
* Output Filtering Requirements
– Long Cable runs
– dv/dt voltage rise
– Peak voltage
– Bearing Currents
 Session Three: Human Machine Interface and Automation Considerations
* Introduction
* PLCs
* Number Systems
* Terminology
* Basic Requirements
* Connecting External Device
* Programming A PLC
– Ladder Logic
– Statement List
– Function Blocks
* Discrete Inputs/Outputs
* Analog Inputs and Outputs
* High-Speed Instructions
* Communications
* Network Communications
– ASI
– Data Highway
– Profibus
– Device net
– TCIP
* Demonstration
PARTICIPANT training konsep sistem automatisasi terbaru
* Industrial, Commercial, Institutional Electrical Engineering &
Maintenance Technicians
* Electric Motor Operations staff
* Other electrical personnel involved in the operation and control
of electric motors.
METHOD training konsep sistem automatisasi terbaru
* Lecture
* Discussion
* Simulation
* Animation
* Video
* Evaluation
Karena kompleksnya pelatihan ini, maka dibutuhkan pendalaman yang lebih komprehensif melalui sebuah training. Dan menjadi sebuah kebutuhan akan training provider yang berpengalaman di bidangnya agar tidak membuat peserta menjadi cepat bosan dan jenuh dalam mendalami bidang teknik ini.
-
Jadwal Pelatihan 2025
- BATCH 1 : 13-14 Januari 2025
- BATCH 2 : 10-11 Februari 2025
- BATCH 3 : 10-11 Maret 2025
- BATCH 4 : 14-15 April 2025
- BATCH 5 : 15-16 Mei 2025
- BATCH 6 : 12-13 Juni 2025
- BATCH 7 : 10-11 Juli 2025
- BATCH 8 : 18-19 Agustus 2025
- BATCH 9 : 17-18 September 2025
- BATCH 10 : 16-17 Oktober 2025
- BATCH 11 : 13-14 November 2025
- BATCH 12 : 15-16 Desember 2025
Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta training pelayanan konsumen prima terbaru
Lokasi training kiat kiat dan seni membuat customer anda happy terbaru :
- Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
- Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
- Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
- Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
- Lombok, Hotel Jayakarta (7.500.000 IDR / participant)
Investasi Pelatihan :
Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Fasilitas training pelayanan konsumen prima murah :
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
- FREE Akomodasi Peserta ke tempat pelatihan bagi peserta training kiat kiat dan seni membuat customer anda happy terupdate
- Module / Handout training customer service excellence terupdate
- FREE Flashdisk
- Sertifikat training pengenalan customer service excellence murah
- FREE Bag or bagpackers (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2xCoffe Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
